How to Mount a Tempest Weather Station
Mount the Tempest Weather Station 6 to 8 feet above ground in open air, on its flat base and pole or with an adjustable mount, with no tall obstacle close enough to block wind. Keep it clear of walls and roofs that radiate heat, tighten everything against sway, and then pair the unit to the app.
On this page (9 sections)
- Where should you put the Tempest Weather Station?
- What height works best for the Tempest?
- How do you mount the Tempest on its own base or pole?
- When do you need the Tempest Original Universal Mount?
- Can you mount the Tempest on a tripod?
- How do you aim and secure the Tempest once it's up?
- What should you check before pairing the app?
- How do you keep the mount solid over time?
- What's the simplest mounting plan for most yards?
Mount the Tempest Weather Station 6 to 8 feet above ground in open air, on its flat base and pole or with an adjustable mount, with no tall obstacle close enough to block wind. Keep it clear of walls and roofs that radiate heat, tighten everything against sway, and then pair the unit to the app.
The Tempest is a single solar-powered unit that reads temperature, humidity, pressure, wind speed and direction, dew point, solar radiation, UV, lightning, and rainfall. Because one sensor does all of that, the spot you choose has to serve every measurement at once.
That makes mounting less about the bracket and more about the location.
Where should you put the Tempest Weather Station?
Put the Tempest in an open spot away from buildings, trees, and hot surfaces. A clear patch of lawn or a fence post with open sky in every direction gives the best mix of readings.
Wind is the fussiest measurement. Tempest's own guidance is to keep the sensor at least four times the height of the tallest nearby obstruction away from it.
If your fence is 6 feet tall and the sensor sits at 7 feet, that means roughly 24 feet of clearance from the fence. Few yards manage that perfectly, so aim for the openest spot you have and accept small compromises.
Heat is the second trap. A wall, patio, or dark roof warms the air around the sensor and pushes temperature readings high on sunny afternoons.
Pull the mount away from masonry and leave a gap so air moves freely around the unit. Our guide to a weather station roof mount covers rooftop placement in more depth if that's your only open option.
What height works best for the Tempest?
Aim for 6 to 8 feet above ground. That height lifts the wind sensor above fences and shrubs and keeps rain splashes and sprinkler spray off the unit.
Going much higher helps wind accuracy but makes the solar panel harder to reach for cleaning and the battery harder to check. A 6 to 8 foot post is a good middle ground for a backyard.
If you mount on a roof, the same rule applies from the roof surface rather than from the ground.
The Tempest measures rainfall from its top surface, so tilt matters as much as height. Set the mount so the flat top sits level, using the base as your guide.
A unit that leans will under-read or over-read rain and can hold water on one side.
How do you mount the Tempest on its own base or pole?
Tempest comes with a flat base and a pole mount, so many installs need nothing extra. Set the base on a level surface or slide the pole mount onto a post, then tighten the hardware.
A flat base works on a sturdy table, a shed roof, or a fence rail only if the surface doesn't flex. Wind makes a loose base rock, and rocking spoils the wind readings even though the unit has no moving parts.
Bolt or clamp the base down rather than trusting gravity.
A pole is the better choice for most yards because it lifts the unit clear of splashes and gives the wind sensor a cleaner sweep. Pick a post that doesn't sway, sink it firmly, and check the mount hardware for play after the first windy week.
The unit itself weighs 1.6 lb, so the post matters more than the weight it carries.

One solar-powered unit reads wind, rain, temperature and UV, so the right spot serves every sensor at once.
See it on AmazonWhen do you need the Tempest Original Universal Mount?
Add the universal mount when you want more height or a wall or rooftop position than the flat base and pole mount give you. It's an adjustable kit in aluminum and stainless steel that holds the unit in place on a post, wall, or open outdoor space.

An adjustable aluminum mount for extra height or a wall and rooftop spot when the flat base won't reach.
See it on AmazonThe kit includes the mounting hardware and a manual, and it's weatherproof and rust-resistant for year-round outdoor use. The bracket straps shown in some images are not in the box, so plan your own way to fix it to a post or wall if you need one.
A precise fit for the Tempest is the whole point, so use it with the station rather than as a generic bracket.
Skip it if the flat base or a plain pole already puts the unit at the right height. The mount is the upgrade for awkward spots, not a required part.
Can you mount the Tempest on a tripod?
Yes, a tripod is the easiest way to get the Tempest up to height without digging a post. The Ambient Weather EZ-48 assembles to about 53 inches and suits a flat lawn or a pitched roof when you straddle the apex.

A galvanized steel tripod and mast that lifts the unit to about 53 inches on a lawn or pitched roof.
See it on AmazonThe tripod base is 33 inches across and the steel tubing is galvanized for corrosion protection. The mast collars use a captive stop-nut design and a supporting cup, which help hold the mast steady once tightened.
Add ground stakes for a lawn install or a rooftop pad kit for a roof, since neither is included.
Height is the limit here. The standard assembly reaches about 53 inches, and each 35-inch mast extension adds about 31 inches.
If you want the unit above a 6-foot fence, plan on at least one extension. Also note that an anemometer in the product pictures isn't part of the kit; you're buying the tripod and mast only.
How do you aim and secure the Tempest once it's up?
Level the unit and tighten every joint so it can't rock. The Tempest has no moving parts, so a wobbling mount is the one thing most likely to spoil wind readings.
Set the flat top level in both directions. Then check that the pole or base sits vertical, because a lean shifts the rain catchment and skews the wind direction.
Hand-tighten the mount hardware and the mast collars, then test for play by giving the post a firm nudge.
Keep the solar panel facing the sunniest sky you have. The Tempest is solar powered and runs on its included lithium-ion battery, so shade from a tree or a wall will drain it over time.
Trim branches or shift the mount if the panel sits in shadow for much of the day. For charging questions, see how to charge a Tempest weather station.
What should you check before pairing the app?
Pair the unit before the final tightening, so you can move it if the signal is weak. The outdoor sensor transmits wirelessly up to 1,000+ feet, but that figure assumes a clear line to the indoor receiver or hub.
Stand at the mount with your phone and run the app's setup steps. Watch the signal strength as you walk back toward the house.
If the reading drops, raise the unit, move it away from metal, or shift it to the side of the building nearest the receiver. A metal roof or a thick wall between the two ends will cut the range.
Check the readings once the unit is live. A temperature that reads several degrees above the nearest official station on a sunny afternoon usually means the mount is too close to a warm wall.
Move it out and give the air room to move. After a rainy day, confirm the rain figure looks sensible against a nearby gauge before you trust it.
How do you keep the mount solid over time?
Check the hardware a few times a year and clear debris from the unit. A mount that was tight in spring can loosen after a winter of wind and frost.
Look for a leaning post, a loosened collar, or a base that has shifted. Re-tighten the mount and reset the level if needed.
Clear leaves and dirt from the top surface so rain can drain and the solar panel stays exposed.
Near salt air or heavy storms, wipe the aluminum and steel parts and check for rust. The universal mount is rust-resistant, and the EZ-48 is galvanized, but both still benefit from a quick inspection.
A few minutes twice a year keeps the wind and rain readings honest.
What's the simplest mounting plan for most yards?
For most homes, a sturdy 6 to 8 foot post in the openest part of the lawn is the best way to mount a Tempest weather station. Use the flat base and pole mount that come with the unit, keep the mount away from warm walls, and tighten it against sway.
Add the Tempest Original Universal Mount if you need more height or a wall spot. Choose the EZ-48 tripod when you want to stand the unit up without digging, on a lawn or a pitched roof.
Before you buy either, read our Tempest vs Ambient Weather Stations comparison to see whether the Tempest is the right station for your yard, and browse ambient weather station options if you want a display-based setup instead.
Whichever route you take, pair first, level the top, and keep the panel in the sun. Those three steps decide how well your readings hold up once the weather turns.
Frequently asked questions
Does the Tempest Weather Station need a separate pole?
No, it doesn't. Tempest ships with a flat base and a pole mount, so a flat surface or a matching pole is enough for many spots.
Add the adjustable universal mount only when you want more height or a wall or rooftop position.
How high should a Tempest weather station be mounted?
Aim for 6 to 8 feet above ground for a home setup. Wind readings stay more honest when the sensor sits above nearby fences and shrubs, and the height also keeps the rain and solar sensors clear of splashes and shade.
Can the Tempest go on a roof?
Yes, and a roof is a good spot when the pitch is safe to reach and no chimney or vent sits close by. Avoid mounting right beside a hot exhaust, a metal flue, or an air conditioner, because those warm the air around the sensor.
What wireless range does the Tempest outdoor sensor have?
Tempest says the solar-powered outdoor sensor transmits wirelessly up to 1,000+ feet. That range is line of sight, so a mount behind thick walls or a metal roof can shorten it.
Pair the unit before the final tightening so you can move it if the signal drops.
How do I keep the Tempest steady in strong wind?
Use a solid post or a braced tripod and tighten the mount so the unit can't rock. The Tempest has no moving parts, so a wobbling mount is the main thing that spoils wind readings.
Check the pole for play after the first stormy week.
About this guide: Our look at mounting a Tempest weather station draws on maker specs, materials and what owners report. See how we research.



