Guide

How to Charge a Tempest Weather Station

Updated on · By the Thunder Thimble team

You don't plug a Tempest in to charge it. Its solar panels charge the built-in lithium ion battery during daylight, so your job is to mount it in open sun and keep the panels clean. A week of weak light can leave it low, and a full reset plus a few sunny days is the usual fix.

On this page (8 sections)
  1. Does a Tempest weather station need to be plugged in to charge?
  2. How does the solar charging actually work?
  3. Where should you mount it for the best solar charge?
  4. Why is the Tempest battery not charging?
  5. How long does a charge last, and when should you bring it inside?
  6. What mistakes stop a Tempest from charging well?
  7. How do you confirm the station is charging and reporting?
  8. Which setup keeps a Tempest charging reliably?

You charge a Tempest weather station by letting its solar panels top up the built-in lithium ion battery in daylight. There's no cable to plug into the outdoor sensor, so the whole job comes down to mounting it in good sun and keeping the panel surface clean.

That's the short answer. The rest is about what "charging" really means for a solar-powered station, how to read the app's battery figure, and what to do when the number won't climb.

If you've just unboxed one, this walkthrough covers the practical steps for how to charge a Tempest weather station without wasting a sunny afternoon.

Does a Tempest weather station need to be plugged in to charge?

No. The outdoor Tempest sensor has no power cord, USB port or wall adapter.

WeatherFlow builds the unit around a solar panel and a single included lithium ion battery, so it charges itself whenever light hits the top.

That design choice is why the station stays outside year round without wiring. The panel converts daylight into stored energy, and the battery carries the sensor through the night and through dull stretches.

There's nothing to plug in and no charging dock to buy.

The indoor side is separate. The app and any smart home integrations run on your phone or home network, not on the outdoor sensor's battery.

So when people ask how to charge a Tempest weather station, the honest answer is that the sky does it for you as long as the panel can see the sky.

How does the solar charging actually work?

The solar panel trickles power into the lithium ion battery all day, and the battery runs the sensor when light drops. Real-time updates every 3 seconds come from that stored energy, so the station needs a steady charge to keep reporting.

Charging is slow and continuous rather than fast and occasional. A few hours of direct sun can restore what a cloudy morning used.

The battery buffers the difference, so short shadows or a passing front don't knock the station offline.

WeatherFlow lists one lithium ion battery as required and included. That's the cell the panel charges.

You won't find a percentage dial on the unit itself, so the app's battery readout is your main window into how charging is going.

Because the sensor has no moving parts, there's no motor or fan drawing extra current. That keeps the power budget modest and means most of the panel's output goes into keeping the readings coming.

It's a low-drain device that only asks for decent light.

Where should you mount it for the best solar charge?

Put the station where the top gets full, direct sun for most of the day, with no tree or wall shadow across the panel. Shade is the single biggest reason a solar sensor runs low.

Aim for a spot that's open above and to the south in the northern hemisphere. Roofs, fence posts and open lawn poles are common choices.

The sensor transmits wirelessly up to 1,000+ feet, so distance from the house usually isn't the limit; sunlight is.

Keep the panel clear of overhangs that cast a hard shadow at midday. A spot that's sunny in the morning but shaded by 2 p.m. will charge slowly.

Watch the shadow line across the day before you commit to a mounting height.

Height matters too. The station reads wind speed and direction from the top of the unit, so raising it above fences and shrubs gives cleaner data and fewer obstructions to the sun.

Our look at Tempest vs Ambient Weather Stations covers how mounting and siting affect readings on both brands.

Can a mount help the station charge faster?

A mount helps when the right height and angle put the panel in clearer sun than a flat base allows. The Tempest Original Universal Mount is an adjustable aluminum bracket for walls, roofs and poles.

WeatherFlow notes the mount isn't required for every install, since the Tempest ships with a flat base and a pole mount. It's worth adding when your only good spot needs a bracket to reach it.

The kit includes mounting hardware and the bracket is powder coated aluminum, so it holds up outdoors. It's a sensible upgrade if shade from a fence or eave is cutting into your charge.

Why is the Tempest battery not charging?

The usual cause is too little sunlight reaching the panel, not a dead battery. Dust, bird droppings, a new shadow from a growing tree or a station knocked slightly off level can all cut the charge.

Start with the simple checks. Wipe the top of the unit with a soft damp cloth and let it dry.

Confirm nothing new is shading it. Look at the app's battery figure over several bright days rather than a single cloudy one.

If the reading still slides, do a full reset and give it a clear sunny week. A reset clears odd states that can stop the sensor reporting properly.

Our guide to how to reset my AcuRite weather station walks through the reset habit on a different brand, and the same patient, check-the-basics approach applies here.

If the battery stays low through bright afternoons after all that, contact WeatherFlow support. Don't open the sealed outdoor unit to swap the cell yourself.

What should you keep on hand for a solar station?

Spare lithium batteries are handy for the accessories around a weather setup, like a backup display or outdoor sensor add-ons. Energizer's AA lithium cells are built for outdoor gear.

These are single-use cells, so they suit backup and accessory duty rather than recharging. The leak-proof build helps protect whatever you put them in.

Keep a pack in the shed so a low accessory never leaves you hunting for batteries on a cold morning.

How long does a charge last, and when should you bring it inside?

The battery is meant to carry the sensor overnight and through cloudy spells, then recharge in sun. WeatherFlow doesn't publish a set number of days, so treat the app's reading as your guide rather than a fixed schedule.

In practice the station is designed to live outdoors and charge daily. It doesn't need a seasonal indoor recharge the way some battery devices do.

Bringing it inside actually stops the charging, so only do that for cleaning, a reset or a repair.

If you live somewhere with long dark winters, expect slower top-ups and a lower battery reading. That's normal as long as the figure recovers when brighter weather returns.

Watch for a steady decline across several sunny days, which is the real warning sign.

Don't store the station in a box for the off season unless you plan to redeploy it. The solar panel is its only power source, and a dark shelf leaves the battery flat.

When you do bring it in, wipe it down and put it back out as soon as you can.

What mistakes stop a Tempest from charging well?

Blocking the panel, mounting in shade and skipping cleaning are the three mistakes that matter most. Each one quietly starves the battery and shows up as a falling reading in the app.

Mounting under a roof overhang or beside a wall that shadows the top is a common one. So is placing it where a downspout, chimney or satellite dish throws shade at some point in the day.

A quick shadow check at noon catches most of these.

Letting dust, pollen or bird mess build up on the panel is easy to miss. A dirty top can cut the light reaching the cells without changing the station's position at all.

A monthly wipe keeps the charge healthy.

Finally, don't expect fast charging on a gray day. Solar charging is gradual, and a station that reads low after a week of cloud will usually recover once the sun returns.

Our roundup of the best Ambient Weather Stations shows how other solar and battery setups handle the same trade-off.

How do you confirm the station is charging and reporting?

Check the app's battery reading and the live sensor updates together. A station that's charging well shows a steady or rising battery figure and keeps sending fresh data.

Open the app and look at the outdoor sensor's battery status. Compare it across a few days, noting the weather each time.

A rise on sunny days and a small dip overnight is exactly what you want to see.

Confirm the sensor is still reporting every 3 seconds. If data has stopped, the issue may be the wireless link or the station's state, not the charge.

A reset then a sunny day sorts most of these cases.

If you run several brands and want to compare their power and reporting behavior, our guide to the best Sainlogic weather stations is a useful cross-check. Every solar station lives or dies by its panel placement, and the app readout is how you keep score.

Which setup keeps a Tempest charging reliably?

For anyone working out how to charge a Tempest weather station, the answer is a sunny, clean, well-raised mount. Pick the Tempest itself as the core station, add the universal mount if shade is a problem, and keep lithium AAs on hand for the gear around it.

Choose the mount when a fence or eave shadows your only good spot and you need height to clear it. Skip it if the flat base or included pole mount already sits in full sun.

Wipe the panel monthly and read the app's battery figure weekly, and the solar charge takes care of itself.

Frequently asked questions

How long does the Tempest battery last on a full charge?

The maker does not publish a set number of days. Expect it to top up every sunny day and hold enough reserve to ride out cloudy spells.

Long overcast stretches, heavy shade and dirty panels are the usual reasons a station reads low.

Why does the Tempest app show a low battery?

The solar panels are getting too little light. Check for shade from trees or walls, wipe dust and bird mess off the top, and move the mount to a spot with full sun.

A full reset then a few bright days usually brings the reading back up.

Can I charge a Tempest with a USB cable?

No. The outdoor unit has no USB or plug socket.

Charging happens only through its solar panels.

If the battery stays low after several sunny days and a reset, contact WeatherFlow support about a replacement rather than opening the unit.

How do I know when the Tempest is charged?

The Tempest app shows battery status for the outdoor sensor. Watch it over a week: readings should climb on bright days and hold steady overnight.

A reading that keeps falling through sunny afternoons points to a panel or battery problem.